I find the factory recommended idle mixture screw setting specs to be very close to ideal. They are listed here for the Honda GL1000.
Idle FUEL Mixture Screw on Honda GL1000
I do usually richen them up an extra 1/8 to 1/4 turn (out) to compensate for the leaner modern “gasoline” which is diluted with ethanol in most US markets.
But sometimes, you just need an excuse to do some high performance tuning on your bike! 🙂
This Tech Tip is provided courtesy of Ross Davis – noted early ‘Wing expert. Ross’s website is here.
Purpose:
Because the rear drive flange is mounted in a somewhat flexible fashion, this tightening sequence aligns this flange and keeps it from premature wear and unwanted friction. It also reduces unnecessary vibration and reduces rear brake squeal.
© Copyright 2022 Randakks Cycle Shakk. All rights reserved.
