Removing Stiction from GL1000 Front Forks

GL1000 forks are notorious for stiction…especially if you use inferior, aftermarket fork seals. A bigger problem: careless re-assembly of front end components that can introduce additional stiction. The typical scenario is putting some “bind” into the forks by the manner in which the front axle is secured on the left side. This often happens after front tire work by sloppy mechanics. The GL1000 is very sensitive to this detail!

Here’s how to remedy. Keep in mind that the sequence and order of this procedure is very critical:

Continue reading “Removing Stiction from GL1000 Front Forks”

© Copyright 2024 Randakks Cycle Shakk

Top ↑